Tips, Tools and Applications for the Electronic Industry in Europe

Learn how to use a spectrum analyzer

Posted on 2017/02/06 by George

This video covers the basic uses of spectrum analyzers and describes optional features that could be helpful for your measurement needs. Enjoy!

 

Read More

New EasyScopeX for Siglent SDS2000X is now released

Posted on 2016/12/15 by George

Siglent have now released the new EasyScopeX software for Siglent oscilloscopes. The EasyScopeX let you connect your oscilloscope to a PC.

Visit Siglent high-quality test and measurement intruments for more information.

Download

 

Read More

What does pople say about the Oscium WiPry 5X?

Posted on 2016/12/01 by George

It's always good to see that our products are mentioned out in the marketplace. We like it and wanted to share the word. Here is a sampling of some of the posts:

Read More

New EasySpectrum software for Siglent SSA3000X series is now released!

Posted on 2016/11/16 by George

New software (P03.02) information:

1, Manually IP connection
2, Edit and exporting “Correction” file
3, Editing and export “Limit” file, and off-line editing.
4, Added scale line to “Spectrum Monitor” mode

Read More

Electromagnetic Compliance: Troubleshooting with Near-Field and Current Probes

Posted on 2016/11/14 by George

INTRODUCTION:


Electromagnetic interference (EMI) can cause a host of problems, especially when developing a product or attempting to pass mandatory electromagnetic compliance (EMC) tests. Garbled displays, bad data, or complete malfunctions can occur when a designis effected by EMI. To minimize the effects of interference, government agencies like the Federal Communications Commission (FCC) in North America create and enforce standards that setlimits on the EM output of a product type.Testing to the specifications is commonly referred to as Electromagnetic Compliance (EMC) testing. 


Many EMC test failures stem from the interaction of unintentional radio frequency (RF) emissions with a circuit or element within the design itself. The electric and magnetic fields that cause this interference are not visible to the unaided eye, which can present complications when trying to isolate the root cause and minimize the effects of the EMI. 


• What is causing the issue?
• Where is the source of the signal or energy causing the radiation?
• How can I fix it?

Read More

Siglent DSD1102 video review part 2

Posted on 2016/10/10 by George

The Siglent SDS1102CML, a two channel 100 MHz oscilloscope, is an incredible bargain at 299€. But how does it stack up? Here's part 2 of the review:

Features
  • 100 MHz bandwidth
  • Real-time sampling rate up to 1 GSa/s
  • Memory Depth up to 2 Mpts
  • Triggers: Edge, Pulse, Video, Slope, Alternate, Waveform math...
  • 6 digital frequency counter
  • Multi-language display support and embedded online help
  • Screensaver from 1 minute to 5 hours
  • Digital filter and waveform recorder function
  • Shortcut storage function key
  • 7 inch TFT-LCD display with 800 * 480 resolution
  • Interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass / Fail

 

Go to the SDS1102CML

 

 

Read More

Siglent DSD1102 video review part 1

Posted on 2016/10/04 by George

The Siglent SDS1102CML, a two channel 100 MHz oscilloscope, is an incredible bargain at 299€. But how does it stack up? Here's part 1:

Features
  • 100 MHz bandwidth
  • Real-time sampling rate up to 1 GSa/s
  • Memory Depth up to 2 Mpts
  • Triggers: Edge, Pulse, Video, Slope, Alternate, Waveform math...
  • 6 digital frequency counter
  • Multi-language display support and embedded online help
  • Screensaver from 1 minute to 5 hours
  • Digital filter and waveform recorder function
  • Shortcut storage function key
  • 7 inch TFT-LCD display with 800 * 480 resolution
  • Interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass / Fail

 

Go to the SDS1102CML

 

 

Read More

SmartScope API Console Demo

Posted on 2016/06/14 by George

A simple console demo of the LabNation SmartScope Device Interface API.

During this demo, we applied
- Channel A : 0.1Hz, 15Vpp sine
- Channel B : 0.2Hz, 15Vpp ramp

How it's done

To get started, check out the repository. From a command line, run ./bootstrap.h <platform>, i.e.

./bootstrap.h MacOS

Then open the generated SmartScopeConsole.<Platform>.sln file with Xamarin/MonoDevelop/VisualStudio.

Read More

How to configure ScanaQuad logic analyzer inputs and outputs

Posted on 2016/05/31 by George

Introduction

ScanaQuad Logic Analyzers and pattern generators have a versatile I/O stage, that allows the user to configure the probes in various different fashions, covers a broad range of applications.

In this tutorial, we’re going to present the different probes configuration options and their usage. We’re going to assume you’re using an SQ200 Logic analyzer. Depending on the model you own, not all features may be available.

Probes configuration

ScanaQuad probes configuration can be accessed by clicking on the “Configure inputs/outputs” button in ScanaStudio software, as show in the image below:

Read More

Micsig Handheld Oscilloscope Teardown by EEVblog

Posted on 2016/05/17 by George

What's inside an Micsig isolated dual channel handheld oscilloscope?

Read More
The Store
Content Center
Contact us

FOLLOW US

Subscribe to Email Updates