Tips, Tools and Applications for the Electronic Industry in Europe

Learn how to use a spectrum analyzer

Posted on 2017/02/06 by George

This video covers the basic uses of spectrum analyzers and describes optional features that could be helpful for your measurement needs. Enjoy!

 

Read More

Oscium WiPry 5x Wins ACE Award

Posted on 2016/12/19 by George

The ACE (Annual Creativity in Electronics) Awards, in partnership with EE Times and EDN, showcase the best of the best in today's electronics industry, including the hottest new products, start-up companies, design teams, executives, and more.

ACE celebrates the promise of new talent and innovation, and pays tribute to the lifetime achievement of a top industry veteran whose contributions have had a demonstrable impact on technological, business, and cultural advancements in the world.

Oscium is honored to be recognized as the ultimate product for 2016 in the category of Wireless / RF.

Read More

What does pople say about the Oscium WiPry 5X?

Posted on 2016/12/01 by George

It's always good to see that our products are mentioned out in the marketplace. We like it and wanted to share the word. Here is a sampling of some of the posts:

Read More

10 myths about WiFi interference

Posted on 2016/09/09 by George

Growing ubiquity of wireless devices combined with the advent of mobility applications requires businesses to be diligent in managing inference throughout their deployments. The many wireless technologies and commonplace electric devices already in use and newly emerging impede wireless performance.

WiFi interference can be a major inhibitor to wireless performance, creating security vulnerabilities and wireless network instability.

This blog post exposes the top 10 most pervasive myths around wireless interference.

  1. The only interference problems are from other 802.11 networks.

    There are a tremendous number of 802.11 devices out there. It is true that the other 802.11 networks can cause interference with your network. This type of interference is known as co-channel and adjacent channel interference. But since other 802.11 devices follow the same protocol, they tend to work cooperatively-that is, two access points on the same channel will share the channel capacity.
    In reality, the many other types of devices emitting in the unlicensed band dwarf the number of 802.11 devices. These devices include microwave ovens, cordless phones, Bluetooth devices, wireless video cameras, outdoor microwave links, wireless game controllers, Zigbee devices, fluorescent lights, WiMAX, and so on. Even bad electrical connections can cause broad RF spectrum emissions. These non-802.11 types of interference typically don't work cooperatively with 802.11 devices, and can cause significant loss of throughput. In addition, they can cause secondary effects such as rate back-off, in which retransmissions caused by interference trick the 802.11 devices into thinking that they should use lower data rates than appropriate.
    Summary: The unlicensed band is an experiment by the FCC in unregulated spectrum sharing. The experiment has been a great success so far, but there are significant challenges posed by RF interference that need to be given proper attention.
Read More
The Store
Content Center
Contact us

FOLLOW US

Subscribe to Email Updates