Watch this step-by-step demonstration and learn how to set a multi-state USB 2.0 complex match and trigger an external output with the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer.
This presentation shows the benefits of using a SPI - and other serial protocol - interface from PC to access, test and debug digital embedded systems such as digital ICs. It presents Byte Paradigm's SPI Storm host adapter.
Learn more about this SPI adapter at The LAB eShop.
The Komodo CAN Duo Interface is a powerful two-channel CAN adapter and analyzer. Watch how this all-in-one tool is used to simultaneously interact, monitor, and transmit CAN data to the CAN/I2C Activity Board using the Komodo GUI Software.
For more information about the Komodo CAN Duo Interface, visit here: TotalPhase Komodo CAN Solo Interface
Tagged Development Embedded Modules
| Leave a replyA complete set of industry leading SPI development tools and popular accessories
The SPI Development Kit from Total Phase is a comprehensive and cost-effective kit that bundles together a complete set of Total Phase's industry-leading SPI development tools and popular accessories.
With this kit, developers can:
- Exercise target devices on an SPI bus as a master device.
- Simulate an SPI master or slave device.
- Program and verify SPI-based Flash devices.
- Passively monitor an SPI bus in real-time with bit-level timing down to 20 ns.
Both beginners and advanced developers will appreciate the convenience and value of the kit for developing and debugging an SPI bus on an embedded system.
Tagged Test Automation Test & Measurement Development Embedded Modules
| Leave a reply